Services by Specifications
01 78 00
Project Management and Close-Out: Coordination of glazing installation,
including scheduling, quality control, and submission of as-built drawings
and warranties per project requirements.
01 81 13
Glazing Consultation and Design Assist: Technical consultation for glazing
system selection, performance optimization, and compliance with project
specifications and sustainability goals.
08 32 13
Glass Entrances and Doors: Installation of glass entrance systems, including
sliding, or swinging, with hardware meeting ANSI/BHMA A156.10 standards.
08 41 13
Curtain Wall Systems: Design, fabrication, and installation of
aluminum-framed curtain wall systems meeting performance requirements for
air infiltration, water penetration, and structural integrity as per ASTM
E283, E331, and E330.
08 41 23
Aluminum Framing Systems: Engineering, fabrication, and erection of aluminum
framing for curtain walls, storefronts, and entrances, tested per AAMA 501
for air/water infiltration and structural loading.
08 42 29
Structural Glass Walls: Engineering and installation of structural glass
wall systems with point-supported or fin-supported glazing, compliant with
ASTM E2358 for structural performance.
08 42 33
Demountable Glass Walls: Installation of modular, relocatable glass
partition systems with acoustic seals, meeting STC ratings per ASTM E90 for
sound control.
08 43 13
Glass Railings and Balustrades: Installation of frameless or semi-frameless
glass railings and balustrades for stairs, balconies, and atria, meeting IBC
code requirements and ASTM E2358 for structural performance.
08 44 13
Storefront Glazing: Installation of aluminum storefront framing systems with
insulated glass units, complying with AAMA 501 standards for thermal
performance and structural durability.
08 44 26
Window Wall Systems: Installation of window wall systems with thermally
broken frames and low-E glazing, meeting NFRC 100 and 200 for energy
efficiency.
08 71 00
Glazing Repairs and Maintenance: Repair and maintenance of existing glazing
systems, including glass replacement and sealant renewal, per manufacturer
specifications.
08 71 53
Door Hardware Supply: Provision of commercial door hardware including
closers, panic devices, and thresholds for glass entrances, compliant with
ANSI/BHMA A156 series for cycle testing and accessibility. (only as it
relates to Aluminum Entrances)
08 80 00
Custom Glass Solutions: Supply and installation of decorative, tempered, or
laminated glass systems, tailored to project-specific requirements,
compliant with ASTM C1048 and CPSC 16 CFR 1201.
08 80 00
Glass Fabrication: Custom fabrication of annealed, tempered, laminated, and
insulated glass units, compliant with ASTM C1036 for quality control and
ASTM C1048 for strength and safety.
08 81 00
Shower Doors: Fabrication and installation of tempered glass shower doors
with stainless steel hardware, meeting ANSI Z97.1 safety standards for
commercial restroom applications.
08 81 00
Sustainable Glazing Solutions: Installation of low-E glass and
energy-efficient glazing systems, compliant with NFRC 100, 200, and 400
standards to support LEED or green building requirements.
08 83 13
Mirrors: Fabrication and installation of monolithic or laminated mirrors for
commercial restrooms, fitness centers, and display areas, compliant with
ASTM C1376 for flatness and edgework.
08 83 23
Glass Shelving and Displays: Custom glass shelving, showcases, and retail
display cases with tempered or laminated panels, compliant with ASTM C1048
and load-tested per project structural requirements.
08 88 13
Fire-Rated Glazing: Supply and installation of fire-rated glass assemblies
for doors, windows, and partitions, certified to UL 263 and NFPA 252
standards for fire resistance up to 180 minutes.
08 88 43
Security and Bullet-Resistant Glazing: Installation of multi-layer laminated
security glazing for high-risk commercial applications, meeting UL 752 Level
ratings and GSA standards for ballistic resistance.
08 88 53
Blast and Impact-Resistant Glazing: Supply and installation of glazing
systems meeting UFC 4-010-01 and ASTM F1642 standards for blast and impact
resistance.